Homepage
Search

Frequently Asked Questions

Below you will find information that might help you understand how to find things or learn about information you might need to know about your city or town.

Planning & Building

35
  • Assessor parcel numbers are 12-digit numbers assigned by the County of Humboldt assessor for property tax purposes. Assessor parcel numbers are used by many county departments to track records and projects. A parcel number may be obtained from a property tax bill or from the Assessor’s Office by calling 707-445-7663.
    Planning & Building
  • The Humboldt County Planning & Building Department has jurisdiction over all unincorporated areas of Humboldt County. This EXCLUDES the City of Eureka, the City of Arcata, the City of Trinidad, the City of Rio Dell, the City of Fortuna, the City of Ferndale, and the City of Blue Lake. The county’s Geographic Information System (GIS) displays parcel and city boundaries. This system can be used to determine if your property is located in a city or in the unincorporated areas of the county.

    Planning & Building
  • To report a possible code violation, complete the Complaint of Possible Code Violation form and email it to codeenforcement@co.humboldt.ca.us. This form is required to open and investigate the complaint.

    Planning & Building
  • All properties within the county are assigned a zoning classification. For example, many properties are assigned an R-1 or Residential 1-Family zoning classification. Like land use designations described below, zoning establishes the distribution, location, and extent of the uses of property. Zoning classifications are more specific than land use designations. For example, zoning designations specify building height and setback requirements. Zoning classifications are described in the Coastal Zoning Regulations and Inland Zoning Regulations. See below.

    Planning & Building
  • Individual zoning classifications, commonly known as districts or designations, are described in the Coastal Zoning Regulations and Inland Zoning Regulations. These regulations affect all residential structures such as dwellings, home additions, fences, swimming pools, and garages, as well as all commercial and other structures like offices, barns and lumber mills.

    Zoning regulations also control what is allowed in specific areas of the county. For example, a property owner typically can conduct a business in a commercial area but not in a residential area except under limited conditions. Similarly, industrial uses are allowed in industrial areas and limited in agricultural areas. In Humboldt County, zoning designations increasingly allow a mixture of compatible uses, such as apartments above shops and offices.

    Zoning regulations also contain combining zones and other standards may also apply to a property. A more detailed explanation of combining zones can be found below.

    The purpose of the Zoning Regulations is to implement the county’s general plan in part by regulating development in accordance with this plan. At the same time, they also help to minimize conflicts resulting from incompatible uses.

    Zoning classifications are described in the Coastal Zoning Regulations and Inland Zoning Regulations. These documents are available from the Plans and Ordinances page.
    Planning & Building
  • Similar to zoning designations described above, all properties within the county are also assigned a land use designation. For example, many properties are assigned an RL or Residential-Low Density designation. Land use designations are derived from the land use goals, policies, and standards of the Humboldt County general plan. Land use designations establish the distribution, location, and extent of the uses of property. Residential land use designations also establish a residential density expressed in terms of residential units per acre. Land use designations are more general than zoning classifications. Typically, land use designations focus on allowed uses whereas zoning classifications provide specific standards related to building height and setbacks. Both are used by decision-makers to determine whether a proposed use, development, or subdivision is appropriate.

    Land use designations are described in the Framework Plan, Community Plans, and Coastal Plans. These documents are available from the Plans and Ordinances page.
    Planning & Building
  • Combining zones, commonly known as overlay zones, apply additional development requirements in specific areas throughout the county. Combining zones are typically used to protect natural and visual resources, but are also used to regulate minimum parcel sizes and special uses. Sometimes combining zones add requirements and other times they modify existing requirements.

    For example the R-Streams and Riparian Corridors combining zone protects creeks and streams by requiring setbacks between development and waterways.

    Another example is the B-Special Building Site combining zone which increases minimum parcel size requirements. The R-1 or Residential One-Family zoning district on its own specifies a minimum parcel size of 5,000 square feet. But when combined with a B-4 Special Building Site Combining Zone, the required minimum parcel size is increased to one acre.
    Planning & Building
  • Setbacks are required distances between the vertical walls of buildings and property boundaries. Generally, they are described as front, rear and side yard setbacks. Setbacks vary from zero to fifty feet depending on the zoning classification for the property. Typically, the front yard faces the road. However, irregularly shaped parcels or parcels that abut more than one road can have unique setback requirements.


    The county’s web Geographic Information System (GIS) displays parcel and zoning boundaries. This system can be used to determine the zoning for a property.


    Setbacks and zoning classifications are described in the Coastal Zoning Regulations and Inland Zoning Regulations. These documents are available from the Plans and Ordinances page.

    Planning & Building
  • The minimum size of a parcel is the smallest lot you can create on a property. It is an important consideration for subdivisions and lot line adjustments. The zone classification determines minimum parcel sizes.

    Generally, the zoning ordinance allows development to occur on parcels that don’t meet the minimum parcel size as if they met the minimum parcel size. However, health and safety requirements other than the zone classification still apply. For example, onsite sewage disposal requires minimum parcel sizes that may differ from the zoning ordinance.

    The county’s web Geographic Information System application show parcels and zoning boundaries, which can be used to determine the zoning for your property.

    Minimum parcel size and zoning classifications are described in the Coastal Zoning Regulations and Inland Zoning Regulations. These documents are available from the Plans and Ordinances page.
    Planning & Building
  • Construction or alteration of any residence requires a building permit from the Building Inspection Division. Follow the links for Standard Residential permit and AOB Residential permit for more info. Other permit requirements may also apply. For example, if the property is located in the coastal zone, the construction of a residence may also need a coastal development permit from the Planning division. In areas without public sewer, sewage disposal system permits are required from the Environmental Health Division. For properties along county roads, an encroachment permit may be required from Public Works. Other local, state or federal permit requirements may also apply.

    Special requirements may apply to rebuilding or altering structures which do not conform to the development standards or allowed uses of the zone classification. More information on nonconforming structures can be found elsewhere on this page. For more information about which permits may apply, please contact the Planning and Building Department.

    Planning & Building
  • Typically, there are more permit requirements in the coastal zone. The additional requirements protect coastal resources such as beaches, public access, dunes and recreational opportunities.

    Planning & Building
  • The county’s web Geographic Information System (GIS) displays parcel and coastal zoning boundaries. This system can be used to determine if a property is in the coastal zone.
    Planning & Building
  • With a building permit, new manufactured homes are allowed by the zoning ordinance the same as other homes. Older manufactured homes are permitted in areas with a T-Manufactured Home or M-Manufactured Home combining zone. Other permits may be required. For example, if the property is located in the coastal zone, the placement of a manufactured home may need a coastal development permit. See the Building Divisions Manufactured Home webpage for more information.

    Planning & Building
  • Fences up to six feet high are exempt from zoning setback and building permit requirements. A fence over six feet high is subject to setback requirements from property lines and requires a building permit from the Building Inspection Division. Fences along roads may have special restrictions in height and material according to the county’s Visibility Ordinance, which establishes standards to ensure adequate visibility corridors for pedestrian and vehicle safety. Contact the Department of Public Works, Land Use division at 707-445-7205 for more information on the Visibility Ordinance.
    Planning & Building
  • Accessory dwelling units (ADU), formerly known as secondary dwelling units, are permitted in many residential zoning districts. All new accessory dwelling units require a building permit from the Building Inspection Division and may require other permits from the Current Planning Division, Environmental Health division, or Public Works. In general, accessory dwelling units are encouraged in the R-1 and RS-5 Residential Single Family zoning districts. You can visit our websites ADU Webpage and Humboldt ADU.org for more information.

    Planning & Building
  • In residential zones, two large animals such as horses or cows may be kept on a property that is at least one acre in size. Two medium sized animals such as goats, pigs, or sheep may be kept on a property that is at least 10,000 square feet in size. Ten small animals such as rabbits and chickens may be kept on a property that is at least 5,000 square feet in size. Crowing roosters are not allowed in residential zones. Larger parcels can accommodate more animals.
    Planning & Building
  • Tree removal involves numerous considerations including fire safety, neighborhood character, and protection of sensitive resources such as habitat. Removal of trees greater than 12 inches in diameter may require a permit from the Current Planning Division. In general, it is easier to remove trees from a property in the inland areas than in the coastal zone. For example, in residential zones, trees may be removed within 30 feet of a building pad as long as the removal does not impact a sensitive resource. However, if the residence is in the coastal zone, permits are required from the Current Planning Division. Tree removal three acres or larger in size, or in Timber Production Zones, require timber harvest plans and are regulated by the state agency Cal Fire.

    Tree removal requirements depend on many factors. Contacting the Planning and Building Department prior to tree removal is recommended.

    Planning & Building
  • Travel trailers within recreational vehicle parks may be used as a dwelling. Outside of recreational vehicle parks, travel trailers may be used as a residence in one of two ways. With a Special Permit from the Current Planning Division a travel trailer may be used for up to six months of the year in zoning districts that allow recreational uses, or, with a valid building permit, a travel trailer may be used temporarily while constructing a home.
    Planning & Building
  • A lot is considered legal if it was created in accordance with the subdivision rules in effect at the time of creation and subsequent transfers of the property did not affect its shape and size. Subdivision rules have changed over time. Determining how a property was created, and tracing the chain of transfer over time can be a challenge. When the legal status of a lot is in question, the Current Planning Division can conduct a determination of legal status. For more information, please contact the Planning and Building Department.
    Planning & Building
  • There are two types of easements. One is a recorded easement that is discovered through the title search process usually conducted by a title company at the time of property transfer. Another is a prescriptive easement which occurs when a property has been used historically for ingress and egress with or without permission. Prescriptive easements often become an issue in the review of coastal development projects where the development impacts the use of an existing trail which accesses the beach. Established and distinguishable trails, roads, or parking areas could indicate the presence of a prescriptive easement.
    Planning & Building
  • The best available mapped flood information is provided by Flood Insurance Rate Maps (FIRM) which are maintained by the Federal Emergency Management Agency. The county’s web Geographic Information System (GIS) shows parcels and the flood hazard information from these maps. You may also review these maps at the Planning and Building Department.

    FIRM maps have four flood hazard zones. In FIRM Flood Zone A, the property is within the mapped 100-year flood plain. This means the property is expected to flood once every 100 years on average. In FIRM Flood Zone B, the property is within the mapped 500-year flood plain. This means the property is expected to flood once every 500 years on average. In FIRM Flood Zone C, the property is within the mapped area of minimal flooding. If the parcel is located in FIRM Flood Zone D, the property is within an area of undetermined, but possible, flood hazards. See our Flood Hazard webpage for more information.

    Planning & Building
  • A nonconforming building or use is one which was established prior to the zoning regulations, and does not meet current development standards or the uses allowed by the zone classification. Nonconforming buildings or uses are commonly known as being "grandfathered in."

    To be recognized as legal and non-conforming, the structure or use must be used continuously for the same purpose without interruption for more than two years.

    Special requirements apply to nonconforming structures and uses. For more information please contact the Planning and Building Department.
    Planning & Building
  • Structures with allowed uses that conform to the standards of the zone classification may be rebuilt with a building permit from the Building Inspection Division. In the coastal zone, a Coastal Development Permit from the Current Planning Division may also be required to rebuild. All state and local standards for sewage disposal must also be met when a structure is rebuilt. Structures destroyed by fire must be rebuilt within two years.

    Nonconforming structures or uses may also be rebuilt in certain situations. For example, single family homes in commercial zones may be rebuilt with a building permit. However, rebuilding commercial structures in residential zones would only be allowed if the new structure is the same size as the old structure. Minor exceptions may be allowed with a Special Permit from the Current Planning Division.
    Planning & Building
  • Legal, nonconforming residences may be altered or enlarged with a building permit from the Building Inspection Division if the alteration meets the required setbacks.

    Alterations that do not change the footprint of a structure such as windows, siding or interior remodels are allowed with a building permit. However, when the alteration does not meet the required setbacks, a variance is required from the Current Planning Division. For more information please contact the Planning and Building Department.
    Planning & Building
  • Subdivisions must be consistent with the minimum parcel size of the zoning classification and the maximum density of the land use designation. In cases where the zoning classification and land use designation allow for different parcel sizes or density, the most restrictive will apply. The county’s web Geographic Information System (GIS) displays zoning classifications and land use designations.

    For example, a parcel with an RL, Residential Low Density land use designation typically has a maximum density of seven dwellings per acre so a one acre parcel could potentially be subdivided into seven parcels. And, if the minimum parcel size allowed by the zone classification was 5,000 square feet per parcel, a seven parcel subdivision would also be consistent with zone classification. However, if the minimum parcel size of the zone classification was 10,000 square feet per parcel, only a four parcel subdivision would be allowed. For more information please contact the Planning and Building Department.
    Planning & Building
  • For small scale projects such as new roofs or new electrical service, licensed contractors can obtain building permits instantly on our permit management software, Accela. For other larger scale projects, building permits usually take two to three months for a typical project. See our First Time Applying for a Building Permit webpage to see the step-by-step process for getting a building permit.

    Planning & Building
  • Planning permits follow these basic steps.

    1) Application Assistance - An applicant meets with planning staff to review the project proposal. Applicants receive an overview of the permit process and are provided with a list of application submittal requirements, estimates of permit fees and processing time.

    2) Application Submittal - An applicant submits a completed application form along with copies of project plans and supplemental documents. Fees are collected at this time.

    3) File Opening & Referral - Planning Division staff generate maps and other documents and send copies of the application to referral agencies for comment.

    4) Staff Report - After the referrals are returned by the reviewing agencies, Planning Division Staff compiles a staff report for the decision-maker. Projects that involve environmental review pursuant to the California Environmental Quality Act have additional reports documenting environmental impacts.

    5) Public Notification - If required, notice of pending decisions are sent directly to surrounding property owners and published in the newspaper.

    6) Decision - Depending on project type, the decision-maker can be the Director, Zoning Administrator, Planning Commission or Board of Supervisors. Other than decisions made by the Director, public hearings are conducted where public testimony is received.

    7) Appeals - After a decision is made, affected parties may appeal the decision within a certain time period. Appeal periods vary depending on the project type. The permit becomes effective upon completion of the appeal period. Any unpaid fees are invoiced at this time.

    8) Post Approval Conditions - Most permits are approved with specific conditions. Conformance with permit conditions is coordinated between the applicant and Planning Division staff. The project is not complete until all required conditions are met.
    Planning & Building
  • Fees depend on project type and location. The Planning and Building Department also collects fees on behalf of other participating agencies. 

    Planning & Building
  • The Planning and Building Department offers two services to assist with the planning permit application process.


    1) Through the Application Assistance service, Current Planning Division staff provide direction to applicants regarding application submittal requirements, estimates of permit fees and processing time, and an overview of the permit process.


    2) Through the Project Facilitation service, a Senior Planner assists with filling out the application form, provides application documents such as plot plans and compiles other essential documents.


    Please see the Resource Library for more information.

    Planning & Building
  • While the county’s web Geographic Information System (GIS) is not a substitute for a complete records check, it does display a significant amount of information on specific parcels. For example, this system can be used to research if a property is in the coastal zone and show which zone classification and land use designation apply.


    There are many important considerations for buying a property. The legal status of the parcel, unpermitted structures, environmental and geological development constraints, and the existence of easements or life estates are a few examples of issues that can make property transactions complex. Rigorous due diligence is advised before purchasing any property.


    Prospective purchases can use the Information Request service to learn what records the Current Planning Division has for a property. 


    Please see the Resource Library for more information.

    Planning & Building
  • The county’s web Geographic Information System (GIS) can be a helpful tool for researching which zones apply to a property. For example, this system can be used to research if a property is in the coastal zone and show which zone classification and land use designation apply.

    Zoning classifications are described in the Coastal Zoning Regulations and Inland Zoning Regulations. These documents are available from the Plans and Ordinances page.
    Planning & Building
  • Typically, if a use is principally permitted in the zoning code, the use does not require a permit from the Current Planning Division. Construction of structures still require a building permit. However, if the project is located in the coastal zone, a discretionary permit from the Current Planning Division is generally required, even if a use is principally permitted.


    Uses that are conditionally permitted in the zoning code always require a discretionary permit from the Current Planning Division. Examples of discretionary permits include Coastal Development Permits, Conditional Use Permits and Special Permits.

    Planning & Building
  • The Local Agency Formation Commission (LAFCo) is responsible for review and approval of annexations. The city, county and LAFCo work together in reviewing proposed annexations. For more information, contact LAFCo at 707-445-7508 or visit 1125 16th Street, Suite 202 in Arcata, CA 95521.
    Planning & Building
  • No. These deed restrictions are private agreements, and are enforced by the property owner. Deed restrictions can be researched through a title company or the Humboldt County Recorder’s Office.
    Planning & Building
  • Planning & Building
  1. Site Footer

    Contact Info and Links

Contact Us

  1. Humboldt County
    825 5th Street
    Eureka, CA 95501
    Phone: Staff Directory

  1. Logo for County of Humboldt - The Home of the Redwoods

Government Websites by CivicPlus®
Arrow Left Arrow Right
Slideshow Left Arrow Slideshow Right Arrow